Puget Lite Pavers, Inc. is your source for the newest innovation from AWS tm Pedestal Systems. The adjustable head Diamond Head tm Series makes installing pavers on pedestals so much easier. The two piece top cap adjusts a full 1-1/8″ to virtually eliminate PVC cutting in the field. The new 6-1/2″ base cap improves balance and on most membranes will eliminate the need for a barrier piece. When installing on greater than a 2% slope, use the AWS tm Slope Compensator to adjust for vertical up to 2%. The original AWS tm top shims lock in place on the top cap. New 1/4″ bottom shims build suports with a 6-1/5″ diameter and lock in place when used with the two or three piece adjustable head pedestals. Use the bottom shims with the new top spacer with fins when less than an inch of clearance is available.
AWS tm Pedestal Systems celebrates 15 years of success in 2015. The new Diamond Head tm Series is more efficient to install, economical (one price whether 3″ tall or 20″ tall) as you do not add couplings to grow your pedestal taller, strong as alternative systems, and proven.
Install three CAD drawing of the full three piece pedestal and of the shorter two piece pedestal and one of the slope compensator.
AWS PEDESTAL SYSTEM, “Diamond Head Series” PRODUCT DATA SHEET
|Top Head||ABS plastic||6-5/8″ diameter|
|Base Component||ABS plastic||“|
|Top Shims 1/8″ & 1/16″||ABS plastic||“|
|1/4″ Bottom Shim||ABS plastic||“|
|Top Spacer with fins||ABS plastic||“|
|Perimeter Top Cap||ABS plastic|
|Perimeter Base Cap||ABS plastic|
withstanding 11,500psi load capacity
|SDR 35/Schedule 3034 PVC||4 inch interior diameter
4.215 Exterior Diameter
Compression tested up to 22″ tall
|Joist Plate||ABS plastic||4-7/8″ diameter|
|Quarter Lock Discs||ABS plastic||Interlocking disc to stabilize
wood tiles at an intersection using
the Diamond Head Series pedestals with predrilled pilot hole.
The AWS Pedestal System Diamond Head Series consists of “snap fit” Pedestal caps, shims and leveling plates made of rigid ABS plastic forming the adjustable head pedestal system and recycled rubber parts used as vertical adjustment and base buffer components. The pedestal system is combined with “off the shelf” 4″ inch diameter, type SDR 35 PVC sewer pipe, white or green, cut to nominal heights at installation.
The AWS Pedestal System Diamond Head Series is designed for use with Architectural Pavers, Natural Cut stone gauged for pedestal set and side sawn, Wood tile systems and Ceramic tiles designed for raised installations. Combinations of top and base components, shims and slope adjustment parts “snap fit” with PVC pipe pedestals can provide elevation of the pavers off the substrate from 1/8″ (top spacer with fins), to provide adequate space for utilities to run beneath the paver surface or to make up for the differences in height between the structural deck and the finished elevation. The Top Head (two piece) assembly offers a full 7/8″ threaded height adjustment capability to fine tune height of pedestals at installation. Slope adjustment is made by changing the height of the cut PVC pipe and using the stackable Slope Compensator and or with the Buffer Pad. Top Shims rest in place on the Top Head in any of the four quadrants for the purpose of fine tune leveling of pavers.